Arduino is an open-source electronics prototyping platform based on flexible, easy-to-use hardware and software. It is a very useful and applied tools. We can find many code and sharing information from internet. Arduino development board has good scalability/ compatibility, and a wide range for application. So we can extend from the Arduino board of the modules alls type what we need. It's intended for artists, designers, hobbyists and anyone interested in creating interactive objects or environments.
Arduino can be very easy to implement prototypes for the original design verification, but if you want a large-scale commercial applications, the price of Arduino is still too high, so there very little Arduino-based commercial products on the market.
So we releasedMassDuino, a new solution that is easy to use Arduino platform advantages, combined with low manufacturing costs , making the products which is developed on Arduino platform can be mass-produced immediately, quickly turn ideas into products.
Massduino is a new product line, which combines the Arduino platform peripheral -rich, convenient and quick development, low-cost and easy to manufacture large-scale production advantages. Almost all of the Arduino code can be applied to MassDuino without modification, users do not need to learn any new knowledge, you can immediately begin using MassDuino to product development.
MassDuino use a special custom MCU MD-8088, this chip has a very unique and new design, ensuring high operating efficiency while providing a low cost of applications.
INHAOS upcoming a series of application modules which is based MassDuino. The application modules can be developed in the Arduino environment , and then direct used to commercial products, creative implementation and production time reduced to a minimum.
3. MD-8088 specification
(1) 32 8-bit general-purpose working registers
(2) Performance when working in 32MHz up to 32MIPS
(3)Single-cycle hardware multiplier(8×8)
(4)Can be edited in the Arduino environment, concise and easy to use
(5)504 bytes of data FLASH, support byte read (simulate E2PROM)
(6)1K bytes SRAM on-chip
(7)131 instructions, 80% instruction execution time for a single clock cycle
(8)Programmable synchronous / asynchronous USART
(9)Can work in master / slave mode SPI Serial Interface
(10)Support the expansion of the chip in-circuit debugging functions
(11)8K bytes of in-system programmable FLASH, innovative data encryption technology
(12) By SWD interface programming for FLASH, EEPROM, system configuration area , the ISP function
(13) Up to 30 programmable I / O
(14)High-performance, low -power and low-cost
(15)I2C -compatible two-wire serial communication interface protocols , supporting master and slave device mode